Gold and Platinum

​

​

​

​

​

​

​

​

​

​

​

 

​Ceramvetro has a wide variety of liquid platinum and liquid bright gold products, the result of many years of continuous development and research to satisfy customer’s needs. Only material of the highest quality is used, and a meticulous quality control ensures a perfect finished product.

 

Main Charateristics

• High brillance

• Steady lemon color

• High resistance

• Low odour

​

Application

Ceramvetro produces gold and platinum for hand brushing, direct printing and for decals.

For hand brushing application is recommendable to clean and dry perfectly the brush before use.

Up to 10% of Ceramvetro Thinner BD61 can be used.

 

Firing

Firing cycle depends on the support:

• Porcelain 720°C – 850°C

• Ceramic 630°C – 710°C (long) 740°C – 960°C (fast)

 

Packaging

100g, 1kg

​

​

​

​

​

​

​

​

​

​

​

​

Luster LUC Series

​

​

​

​

​

​

​

​

​

​

​

Ceramvetro lusters cover all the range of traditional colors and some innovative too; all lusters have been conceived and realized all in our internal lab, with the finest equipment and hight tech devices.

Some of them contain precious metal.

 

Main Charateristics

• High stability

• Intense colors

• Long durability

 

Application

Lusters are applied by brushing or spraying. In both cases these lusters must be diluted with our Ceramvetro thinner BD61.

For brushing add about 25% of thinner; for spraying add from 90% to 300% of thinner. The proper pressure for spraying is 0,7 to 1,1 kg/cmq. The object to be decorated should be held at a distance from 15cm to 50cm, depending on the size. The compressed air should be dried to prevent water from entering the luster, which could cause white spots to appear after firing.

 

Firing

Firing cycle depends on the support:

• Porcelain 720°C – 850°C

• Earthenware 630°C – 710°C

 

Packaging

100g (for lusters with gold content only), 1kg, 10kg

​

​

 

​

​

​

​

​

 

​

Dipping Luster

​

Ceramvetro lusters cover all the range of traditional colors and some innovative too; all lusters have been conceived and realized all in our internal lab, with the finest equipment and hight tech devices.

 

Main Charateristics

• Easy to use

• Fast application

• High brilliance

 

Application

Lusters 31 series are used by dipping. The object is hand dipped in the solution and then allowed to dry for few minutes. After that the object can be fired in the kiln.

 

Firing

Firing cycle depends on the support:

• Porcelain 720°C – 850°C

• Earthenware 630°C – 710°C

 

Packaging

20kg

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

Deflocculant

 

Deflocculant is an additive used for slip casting (mass production of pottery and porcelain).

 

Main Charateristics

• Reduce the need of water in the slip

• Faster casting process

• Increase of factory production up to 40%

 

Application

A slip made of a mixture of water, clay and Deflocculant is poured into a plaster mould.

The plaster begins to absorb the water and therefore solidify the liquid clay mixture in the mould, allowing the correct thickness of the finished object.

Now the object (called greenware) can be removed from the mould and finished. The extra edges can be trimmed off, and a damp sponge can be used to smooth the surface. The object is then left to dry completely. At this point the object can be fired in the kiln.

 

 

Packaging

25kg