GLASS LINE

Gold and Platinum

 

Ceramvetro has a wide variety of liquid platinum and liquid bright gold products, the result of many years of continuous development and research to satisfy customer’s needs. Only material of the highest quality is used, and a meticulous quality control ensures a perfect finished product.

 

Main Charateristics

  • High brillance

  • Steady lemon color

  • High resistance

  • Low odour

  • Shiney yellow color also in the internal part

Application

Ceramvetro can supply gold and platinum for hand brushing (it is possible to add 10%  of Ceramvetro thinner BD61), for direct printing and for  decal production.

For hand brushing application it is recommended to clean and dry perfectly the brush before use.

 

Firing

Firing cycle depends on the support:

  • Crystal 510°C – 550°C

  • Glass 540°C – 580°C

  • Glass bottles 580°C – 650°C

 

Packaging

100g, 250g 

Luster LUV Series

Ceramvetro lusters cover all the range of traditional colors and some innovative too; all lusters have been conceived and realized all in our internal lab, with the finest equipment and hight tech devices.

Some of them contain precious metal.

 

Main Charateristics

  • High stability

  • Intense colors

  • Long durability

 

Application

Lusters are applied by brushing or spraying. In both cases these lusters must be diluted with our Ceramvetro thinner BD61.

For brushing add about 25% of thinner; for spraying add from 90% to 300% of thinner. The proper pressure for spraying is 0,7 to 1,1 kg/cmq. The object to be decorated should be held at a distance from 15cm to 50cm, depending on its size. The compressed air should be dried to prevent water from entering the luster, which could cause white spots to appear after firing.

 

Firing

Firing cycle depends on the support:

  • Crystal 510°C – 550°C

  • Glass 540°C – 580°C

  • Glass bottles 580°C – 650°C

 

Packaging

100g (for lusters with gold content only), 1kg, 10kg

 

 

Thermoluster N Series

 

 

 

 

 

 

 

 

 

 

 

Thermolusters are used for the decoration of glass.

 

Main Charateristics

  • High brilliance

  • Stability of colors

  • Long durability

 

Application

Thermolusters are applied by spraying on red hot glass (at a temperatureof more than 800°C before the annealing cycle). No thinner is needed.

In case the decoration result is a light grey the operator must apply more thermoluster; if a white powdery substance appears on the surface of the object after firing, the operator must apply less thermoluster

 

Packaging

25kg

Alabaster

Ceramvetro has developed  highly professional in-body colors for glass which give an Alabaster effect.  Continuous research has permitted the creation of a  series with a wide range of colors.

 

Main Charateristics

  • High compatibility with the glass

  • Intense colors

  • Perfect fusibility

 

Application

Alabaster colors are applied on fusing glass. Application can be made by a spinning machine.

 

Packing

25kg

Crinkles

Crinkles are glass chips made from grinding glass blocks (cold frits), or are produced by quickly cooling  a glass block in cold water before milling  (hot frits).  Glass masters use crinkles  to obtain required tones for coloured or uncoloured  glass. Other uses include the creation of floor tiles embedded with crinkles.

 

Main Charateristics

  • High stability

  • Intense colors

  • High compatibility

 

Application

Crinkles are applied on hot fused glass. They are especially suitable  for production by hand and glass blowing 

 

Packing

25kg

Satinglass

Ceramvetro markets glass frosting powders and creams. Satinglass can be used to frost/etch flat glass, glass lampshades, perfume bottles and cosmetic containers.

 

Main Charateristics

  • Extreme softness at touch

  • High scratch resistance

  • Long durability

 

 

Application

Satinglass is mixed with an industrial grade of hydrochloric acid, to form a glass-etching bath. Before frosting the glass, a pretreatment is useful if the glass surface is dirty or fingerprinted.

The frosting temperature can be varied from 15 to 35 °C (the best temperature is at 25°C).

 

 

Packaging

25kg bag

Metal Leaf

 

 

 

Metal leaf (gold, silver and copper color) is a thin metal laminated with a special method, and is used to decorate wooden frames, furniture, glass and ceramic

 

Main Charateristics

  • Precious metal effect

  • Stable and high quality

  • Consistent bright color

 

 

Application

After applying a water or solvent based glue, is possible to apply the metal foil with a knife or a feather. After the application of the foils it is necessary to spray with a protection varnish.

 

 

Packaging

5000 foils box (silver), 10000 foils box (gold and copper)

 
 
 
Glass Luster
Glass Luster

press to zoom
Glass Luster
Glass Luster

press to zoom
LUV Green V102
LUV Green V102

press to zoom
Glass Luster
Glass Luster

press to zoom
1/20
ORO 3
ORO 3

press to zoom
ORO
ORO

press to zoom
ORO 1
ORO 1

press to zoom
ORO 3
ORO 3

press to zoom
1/3
termolustro con alabastro celeste
termolustro con alabastro celeste

press to zoom
Iris
Iris

press to zoom
TERMOLUSTRO FUMO
TERMOLUSTRO FUMO

press to zoom
termolustro con alabastro celeste
termolustro con alabastro celeste

press to zoom
1/7
ALABASTRO BIANCO 019
ALABASTRO BIANCO 019

press to zoom
alabastro satinato
alabastro satinato

press to zoom
IMG_9036
IMG_9036

press to zoom
ALABASTRO BIANCO 019
ALABASTRO BIANCO 019

press to zoom
1/6
GRANIGLIE
GRANIGLIE

press to zoom
GRANIGLIE
GRANIGLIE

press to zoom
GRANIGLIE
GRANIGLIE

press to zoom
1/2
alabastro satinato
alabastro satinato

press to zoom
alabastro satinato
alabastro satinato

press to zoom
1/1
foglia
foglia

press to zoom
foglia dettaglio
foglia dettaglio

press to zoom
foglia
foglia

press to zoom
1/2